Whirlpool TEP 649 L Bedienungsanleitung PDF herunterladen (Seite 22)

Safety devices

Pan sensor

Each cooking zone is equipped with a pan sensor

device. The hotplate only emits heat when a pan

with suitable measurements for the cooking zone is

placed on it. If the indicator light is flashing, it may

indicate:

 An incompatible pan.

 A pan with a diameter which is too small.

 The pan has been removed from the hotplate.

Residual heat indicators

While the temperature of the cooking zone remains

above 60°C, even after the programme has finished,

the residual heat indicators placed near the relevant

cooking zone remain lit to prevent the risk of burns.

Overheating protection

If the electronic elements overheat, the hob switches

off automatically and  appears on the display.

When a suitable temperature level has been

restored, this message disappears and the hob may

be used again.

Safety switch

The appliance has a safety switch which

automatically switches off the cooking zones when

they have been in operation for a certain amount of

time at a given power level. When the safety switch

has been triggered, the display shows 0.

Buzzer

This can also indicate several irregularities:

 An object (a pan, cutlery, etc.) has been placed

on the control panel for more than 10 seconds.

 Something has been spilt on the control panel.

 A button has been pressed for too long. All of the

above situations may cause the buzzer to sound.

Remove the cause of the malfunction to stop the

buzzer. The control panel locks automatically in

the above situations. To unlock it press the [key

icon] button; the settings will have been

maintained. If the cause of the problem is not

removed, the buzzer will keep sounding and the

hob will switch off.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 67 68

Keine Kommentare

Whirlpool TEP 649 L Bedienungsanleitung Seite 22