Whirlpool AMD 009 Bedienungsanleitung PDF herunterladen (Seite 1)

PRECAUTIONS FOR USE

Warning:

• Make sure to insert the power plug securely.

Insecure insertion of the plug may cause

electrocution or fire.

• Never unplug the machine while running.

• Do not damage the cord or use an unapproved

cord.

• Do not plug other electric appliances into the

same socket or use extension cords.

• Never operate the air conditioner with wet

hands.

• Do not pull the plug out by the cord. This could

cause the cord to overheat and catch fire.

• Turn off the air conditioner and pull out the plug

when cleaning the air conditioner. This will

prevent electrocution or injury.

• The rated voltage of this air conditioner is 220-

240V with a tolerance of ±22V for fluctuation.

The compressor will vibrate if the voltage is too

low, causing damage to the cooling system.

• If you notice anything unusual (e.g. burnt smell),

switch off the power supply immediately and

contact the Whirlpool Authorized Service

Center nearest you.

If the abnormal condition continues, the air

conditioner could be damaged and could also

cause electrocution or fire.

• Grounding: The unit must be reliably grounded.

The grounding cable must be connected to the

special grounding system in the building.

If the building does not have a grounding

system, ask an expert electrician to install one.

Never connect the grounding cable to a gas

pipe, water pipe, sewage pipe or other unless

the professional considers it reliable.

• Make sure to unplug air conditioner when not in

use for an extended period. Accumulation of

dust could cause heating or fire.

• Set the room temperature appropriately. The

difference between indoor and outdoor

temperature should be 5°C.

Appropriate adjustment of the temperature

setting serves to reduce consumption.

• When the air conditioner is running, do not

leave doors and windows open in the room.

This will prevent loss of effectiveness of the air

conditioner.

• Never block the air inlet or outlet of indoor and

outdoor unit, as this will decrease the effect of

the air conditioner or cause it to shut down or

even catch fire.

• Spray cans, chemicals and gas tanks must be

placed at least 1m away from the indoor and

outdoor unit; they could cause fire or explosion

• Make sure to mount the outdoor unit on a

sturdy base. If the base is damaged and

unsteady, the unit could fall and cause injury.

• Do not stand or place anything on the outdoor

unit. Persons or objects falling from the unit

could cause injuries.

• Do not repair the air conditioner yourself.

Incorrect repairs could cause electrocution or

fire. Contact the Whirlpool Authorized Service

Center nearest you for repairs.

• Adjust the air flow and direction properly. When

the air conditioner is running, you can adjust the

air flow direction by setting the upper/lower

guide louver position using the remote control

or handle.

• Never reach with your finger or a stick into the

indoor or outdoor unit.

• Never blow the air directly at pets or plants, as

this may harm them.

• Never spray water onto the unit or wash the air

conditioner with water.

• Never let the air conditioner blow on a heat

source. This could put the flame out and cause

carbon monoxide poisoning.

• To avoid any harm to your health, do not blow

the cold air on your body too long or lower the

room temperature too much.

• This air conditioner cannot be used for drying

clothes or chilling foods.

Warning:

• Do not cut or damage the power cords and

control lines. Any damaged power cords and

signal control lines of the air conditioner must

be replaced by qualified technicians with special

cords.

• Persistent abnormality indicates that the air

conditioner may be damaged with the

consequent risk of electric shock or fire. This

may cause an electric shock.

• To prevent fire always use a special power

supply circuit.

• Disconnect the air conditioner from the power

supply if it is to be left unused for a long period.

• For 18-23K, 230V, with a tolerable fluctuation of

±23V. The compressor is subject to strong

vibrations under very low voltages which can

damage the refrigerating system. Electrical

elements are easily damaged by high voltage.

1 2 3 4 5 6 ... 21 22

Inhaltsverzeichnis

Seite 1 - PRECAUTIONS FOR USE

26PRECAUTIONS FOR USEWarning:• Make sure to insert the power plug securely.Insecure insertion of the plug may causeelectrocution or fire.• Never unplu

Seite 2 - INSTRUCTIONS FOR USE

Warning:Do not attempt to repair the air conditioner yourself. Incorrect repairs may cause electrocution orfire, so please contact the Whirlpool Autho

Seite 3

36Malfunction CauseIndoor unit makes noise. • The sound comes from the fan or compressor relay switching over(close/open).• Air conditioner may make n

Seite 4 - HOW TO USE THE REMOTE CONTROL

37INSTALLATION SERVICE - PRECAUTIONSON INSTALLATIONImportant Precaution1. The air-conditioning unit must be installedaccording to national wiring rule

Seite 5 - Remote Control

38ELECTRICAL SAFETY REQUIREMENTS1. The power supply must be of rated voltage withspecial circuitry for air-conditioning. Thediameter of the power cord

Seite 6

39INSTALLATION DIMENSION DRAWINGSAMC 996 - 9k BtuAMC 998 - 12k BtuFrom the ceilingOver 15cmOver 15cmOver 15cmFrom the WallFrom the WallAbove the floor

Seite 7

40AMD 009 - 18k BtuFrom the ceilingOver 15cmOver 15cmOver 15cmFrom the WallFrom the WallAbove the floorOver 300cmOver 240cmAir suction sideFrom obstac

Seite 8 - CLEANING AND MAINTENANCE

41INSTALLING INDOOR UNITInstalling Wall-Mount Frame1. Level with plumb line or spirit level. As the drain outlet is on the left side, it is better for

Seite 9

42Connection of Indoor and Outdoor Cables1. Pull open the front panel;2. Unscrew the screw fastening the covering plate onterminal board. (See Fig. 1)

Seite 10 - TROUBLESHOOTING

43Installing Connecting Pipe1. The tapered end of the connecting pipe must be in line with the corresponding tape face of the valvejoint.2. Tighten th

Seite 11

44INSTALLING OUTDOOR UNITCable connection1. Remove the handle on the right side plate of the outdoor unit (one screw).2. Remove the cable clamp, conne

Seite 12 - ON INSTALLATION

27• Ensure that the power supply is suitablyprotected by a special circuit with air breaker.The air conditioner automatically starts or stopsaccording

Seite 13

45Vacuum-pumping and Leakage Inspection1. Remove the nut cover at the shutoff valve.2. Align with the center of the fitting pipe andmanually tighten t

Seite 14 - AMC 998 - 12k Btu

46CHECKS AND TEST RUN AFTERINSTALLATIONCheck Items After InstallationTe s t R u n1. Preparation of Test Run• Do not switch on the power before all in

Seite 15 - AMD 009 - 18k Btu

47ELECTRIC HEATING BELTELECTRIC HEATING BELT FOR INVERTER MODEL AMC 996 - 998 ONLYIn case of malfunction of the outdoor temperature sensor, both elect

Seite 16 - INSTALLING INDOOR UNIT

28DESCRIPTION OF AIR CONDITIONER1. Power plug (AMC 996/998)2. Terminal board cover plate3. Key switch4. Front panel5. Filter6. Guide louver7. Display8

Seite 17 - Yellow-Green

29HOW TO USE THE REMOTE CONTROLOperating Guideline - General Procedures1. After the main unit is connected to power, press the ON/OFFkey on the remote

Seite 18

30UP/DOWNUP/DOWN KeyPress these two keys when in COOL, DRY, FAN or HEAT mode to set a temperature between 16 and30°C. The temperature of each mode can

Seite 19 - INSTALLING OUTDOOR UNIT

31CLOCKCLOCK keyWhen you press of this key, the CLOCK icon will start to blink and enter the clock adjustment mode. Inclock adjustment mode pressing t

Seite 20

32STORAGE AND TIPS FOR USING THE RCHow to insert the batteries1. Unscrew the screw on the battery cover.2. Gently press down on the battery cover and

Seite 21 - INSTALLATION

33CLEANING AND MAINTENANCEWarning• Make sure to stop the unit and unplug it beforecleaning your air conditioner. Otherwise youmay risk electrocution.•

Seite 22 - ELECTRIC HEATING BELT

341. Removing the air filterGrasp the groove on the two ends of the frontpanel. Pull as shown by the arrow with force toopen the front panel at an ang