
12
GB
Installation
Before operating your new appliance please read this
instruction booklet carefully. It contains important
information concerning the safe operation, installation
and maintenance of the appliance.
Please keep these operating instructions for future
reference. Pass them on to possible new owners of the
appliance.
Positioning
Keep all packaging materials out of the reach of
children. It may present a choking or suffocation hazard
(see Precautions and tips).
The appliance must be installed by a qualified
professional in accordance with the instructions
provided. Incorrect installation may damage property or
cause harm to people or animals.
Fitting the appliance
Use the appropriate cabinet to ensure that the appliance
functions properly.
The supporting surface must be heat-resistant up to a
temperature of approximately 100°C.
If the appliance is to be installed above an oven, the
oven must have a forced ventilation cooling system.
Avoid installing the hob above a dishwasher: if this
cannot be avoided, place a waterproof separation
device between the two appliances.
Depending on the hob you want to install, the cabinet
must have the following dimensions (see figure):
560 +/- 1
490 +/- 1
48
590
520
Ventilation
To allow adequate ventilation and to avoid overheating of
the surrounding surfaces the hob should be positioned:
At a minimum distance of 40 mm from the back panel
and 600mm from any other vertical surfaces.
So that a minimum distance of 20 mm is maintained
between the installation cavity and the cabinet
underneath.
5 mm
min. 20 mm
min. 20 mm
min. 40 mm
COMPARTMENT
5 mm
min. 40 mm
FAN-ASSISTED
OVEN
Fixing
The appliance must be installed on a perfectly level
supporting surface.
Any deformities caused by improper fixing could change
the features and the operation of the hob.
FRONT SIDE OF HOB
30
40
SUPPORTING
SURFACE
UNDERSIDE OF HOB
Kommentare zu diesen Handbüchern