Whirlpool HOB 461 S Bedienungsanleitung PDF herunterladen (Seite 28)

INSTALLATION INSTRUCTIONS

GAS SUPPLY CONNECTION

Before the installation, make sure that the

local distribution conditions (gas type and

pressure) and the setting of this appliance

are compatible.

The local distribution conditions are given

on the plate or label.

For GB and BE (G20/G25) only: before

connecting the appliance to the gas main,

mount conical elbow “G” (supplied with

the appliance) onto the union elbow “C”,

upon which the gasket “F” has been

placed (see side picture).

The hob is set up and calibrated to work with the

gas indicated on the rating plate affixed to the

appliance and on this instruction booklet.

The gas supply system must conform to the

local regulations in force.

To connect the hob to the gas mains or cylinder

use a flexible stainless steel hose with

continuous wall conforming to local regulations.

Use gasket “F” for the cylindrical elbow

connection.

The flexible metal tubes must be at most 2 m

long.

Attention: If a flexible stainless steel hose is

used, it must be so installed that it cannot

come into contact with a movable part of the

unit and is not obstructed and so that its

whole length can be inspected.

The hob connection is made up as follows:

- 1 nut “A”

- gaskets “F”

- union elbow “C”

- 1 conical adapter “G”

for GB and BE (G25/G25) only.

82569_GB.fm Page 88 Wednesday, March 21, 2001 5:18 PM

Black process 45,0° 133,0 LPI

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 34 35 36

Keine Kommentare

Whirlpool HOB 461 S Bedienungsanleitung Seite 28