Whirlpool HOB 461 S Bedienungsanleitung PDF herunterladen (Seite 26)

INSTALLATION INSTRUCTIONS

INSTALLATION ON UNITS

WITH DOOR

The unit must be so constructed that when the

door is opened or closed, even violently, the

pressure or depressure caused by this does not

cause the burners to go out, whether set to

minimum or maximum.

Leave a depressure space of 30 mm between

the bottom of the hob and the top of the unit

underneath.

FASTENING THE HOB

Each hob is supplied with a set of tabs and

screws to fasten it on units with a working

surface from 2 to 4 cm deep.

The kit includes 4 tabs “A” and 4 self-threading

screws “B”.

• Cut the unit.

• Stretch gasket “C” over the edge of the hole

made, being careful to overlay the junction

edges.

• Turn the hob over and put tabs “A” into the

mountings; only tighten screws “B” a few

turns. Make sure that the tabs are mounted

correctly as shown in the figure.

• Put the hob into the hole cut into the unit and

position it correctly.

• Put tabs “A” into place and tighten screws “B”

until the hob is completely secured.

82569_GB.fm Page 87 Wednesday, March 21, 2001 5:18 PM

Black process 45,0° 133,0 LPI

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 35 36

Keine Kommentare

Whirlpool HOB 461 S Bedienungsanleitung Seite 26