Whirlpool ACM 406/1 Bedienungsanleitung PDF herunterladen (Seite 14)

14

ELECTRONIC PROGRAMMER “TOUCH”

Setting the time.

After connecting to mains or after a power

cut, symbol “A” and “0,00” will both ash

simultaneously on the display.

Keep pressed for some seconds simultaneously

+ and - buttons or just MODE button, till when

symbol “A” turn o and symbol

turn on.

Time can be set just when the dot beneath the

symbol

ashes.

Time cannot be adjusted during cooking

program run.

If time is selected while a automatic cooking

program is running, this is deleted.

Program selection

Keep pressed for some seconds MODE button

and pressing it in turns, the following programs

are selected:

1. Minute Minder

The time turns o, the symbol turns

on and with + and - buttons is possible to

select the time alarm. At the end of the set

time, the buzzer will start and the symbol

ashes. To turn o the buzzer and turn

o the symbol keep pressed for some

seconds MODE button.

The minute minder program runs

independently of other cooking programs.

2. Semiautomatic Program with Duration or

End Time

Select with + and - buttons the duration.

The time of the day turns o, symbol “A” and

“dur” ash. At the end of the set time, the

buzzer will start and the symbol “A” ashes.

To turn o the buzzer press MODE button.

Now the oven is o. Keep pressed for some

seconds simultaneously + and - buttons or

just MODE button and the symbol

is

illuminated.

 

3. Fully automatic program with Duration

and End time

Select with + and - buttons the duration

and the end time. The time of the day turns

o, symbol “A” and “End” ash. Symbol

turns o and the symbol “A” turns on. The

symbol

is illuminated again when the

cooking starts. At the end of the set time,

the buzzer will start, the symbol

turns

o and the symbol “A” ashes. To turn o the

buzzer press MODE button.

Now the oven is o. To set the programmer

on manual operation keep pressed for some

seconds simultaneously + and - buttons or

just MODE button and the symbol

is

illuminated.

Changing/Clearing programs

Each program can be cleared keeping pressed

for some seconds simultaneously + and -

buttons. Symbol “A” turns o.

Each program can be changed keeping

pressed for some seconds MODE button and

then pressing it in turns to the function to be

changed. The adjustment can be done with +

and - buttons.

Is it possible to check whenever the progress

of program keeping pressed for some seconds

MODE button and then pressing in turns to the

function to be checked.

DESCRIPTION OF THE APPLIANCE

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 63 64

Kommentare zu diesen Handbüchern

Keine Kommentare