Whirlpool TSE 774 IX Bedienungsanleitung Seite 64

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 70
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 63
65
Controls
Overheating
Prolonged use of the hob could cause the electronic components to overheat. A thermal
protection device momentarily sets a reduced power (stage 3) on the right-hand cooking
zones and for the TSE 774 model only, on the back left zone as well. The temperature
indicators blink to advise you that this safety measure has been taken.
When the temperature has gone back to normal, the temperature indicators stop blinking
and the zones can be used at higher power settings if need be.
Should the temperature of the electric components continue to rise, the zones
are locked until the temperature drops, as indicated by the blinking of the 3
points of the 4 temperature indicators.
Cooking time programming
You can programme the cooking zones separately or simultaneously and for different
cooking times of up to 3 hours.
Once you have selected the heating power, programme the cooking time as follows:
press the programming key corresponding to the cooking
zone (the corresponding indicator light blinks), 0.00 is
displayed: the cooking time is adjusted in steps of 10 seconds
for the first 9 min 50 sec, then in steps of one minute from 10
min to 3 hours.
press the top part of the zone control key until you reach
the desired cooking time. The time is displayed in minutes
and seconds.
confirm the programmed setting by pressing the
programming key once more: the corresponding indicator light
stays on: the countdown begins immediately until the end of
cooking. The countdown is displayed minute by minute from
3 hours to 10 minutes, and second by second from 9 min 59
seconds to 0.
You can programme all the zones simultaneously for different cooking times: the countdown
displayed corresponds to the zone indicated by the fixed indicator light. If another zone
has been programmed, simply press on the corresponding timer to see the new countdown
displayed.
Once the time is up, the power to the cooking zone concerned is automatically turned off,
the temperature indicator goes back down to 0. A beep sounds to indicate that cooking is
done. The countdown for the other programmed zone is displayed.
Seitenansicht 63
1 2 ... 59 60 61 62 63 64 65 66 67 68 69 70

Kommentare zu diesen Handbüchern

Keine Kommentare