Whirlpool PKLL 751 D2/IX/A Bedienungsanleitung PDF herunterladen (Seite 10)

2. Unscrew the burers with a 7 mm wrench spanner. The internal burner

has a nozzle, the external burner has two (of the same size). Replace

the nozzle with models suited to the new type of gas (see table 1).

3. Replace all the components by repeating the steps in reverse order.

• Adjusting the burners’ primary air

Does not require adjusting.

• Setting the burners to minimum

 

2. Remove the knob and adjust the adjustment screw, which is positioned



! In the event of single-control DRDA (DCDR) burners, adjustment can be

performed by intervening on the 2 screws located near the tap pin (see picture).

Inner DRDA (DCDR)

burner adjustment

Total DRDA

(DCDR) burner

adjustment

 

alight, quickly change the position of the knob from minimum to maximum



 





5. Once the adjustment has been made, replace the seals on the by-passes

using sealing wax or a similar substance.

 

knob to the minimum power setting them remove it and intervene on the

adjustment screw located near the tap pin.

7. Minimum setting adjustment of the DRDA (DCDR) burner with discrete



• To adjust the outer ring, turn the knob anti-clockwise to the minimum

power position.

• To adjust the minimum power setting of the inner ring, turn the knob

clockwise to the minimum power position.

• Remove the knob and intervene on the adjustment screw located near

the tap pin.

! If the appliance is connected to liquid gas, the regulation screw must be

fastened as tightly as possible.

!       

indicating the new type of gas used. Stickers are available from any of our

Service Centres.

! Should the gas pressure used be different (or vary slightly) from the



inlet pipe (in order to comply with current national regulations).

Electrical

connections

DATA PLATE

ECODESIGN

see data plate

This appliance conforms to the EU Regulation no. 66/2014

implementing Directive 2009/125/EC.

standard EN 30-2-1

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 43 44

Kommentare zu diesen Handbüchern

Keine Kommentare

Whirlpool PKLL 751 D2/IX/A Bedienungsanleitung Seite 10

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kochfelder Whirlpool PKLL 751 D2/IX/A