Whirlpool KTI 6412 IX Bedienungsanleitung PDF herunterladen (Seite 9)

Installation

The following instructions are intended for a qualified fitter

to guide him/her along the installation, adjustment and

technical maintenance procedures as correctly as possible

and in full compliance with the applicable norms in force.

Important: unplug the appliance before all operations

(adjustment, maintenance, etc.).

Built-in hob installation

The hobs feature a degree of protection against excessive

heating, consequently, they may only be installed next to

furniture cabinets which are higher than the hob surface itself.

Keep to the following instructions to ensure the correct

installation of hobs:

a) Any cooker hoods should be installed according to the

instructions and guidelines provided by the hood

manufacturer.

b) Built-in glass ceramic hobs can be installed on any

worktop with at least 600 mm depth as long as the latter

is made of materials which can withstand temperatures

of up to 100°C.

560 +/- 1

490 +/- 1

595

510

Distance to

keep between the

cut-out slot and

the cabinet

These dimensions must be respected at all costs as an

incorrect installation could cause the surfaces all around the

hob to overheat.

The hob should be positioned at least 40 mm away from the

back wall or any other vertical surface in order to allow for

correct ventilation and to prevent the surfaces around the

appliance from overheating.

Your hob is supplied with a seal: make sure it adheres

perfectly to the lower surface of the hob frame. It is extremely

important that the seal covers all the hob corners completely

and that it seals the latter perfectly along all its perimeter to

ensure the full airtightness between the hob and the worktop

in order to prevent any accidental spills from penetrating the

furniture cabinet beneath the hob.

Very important: It is vital that you ensure the glass ceramic

hob is built into a perfectly flat supporting surface.

Deformations due to improper fastening could alter the

characteristics of the hob and compromise its performan-

ce.

If a wooden panel is fitted as isolation, the same should

be positioned at least 10 mm below the bottom of the

hob itself.

Note: If the hob is installed above a built-in oven, we

recommend you install the hob on top of a support comprising

two pieces of wood; therefore if the worktop is continuous,

leave an opening of at least 45 x 560 mm at the back.

560 mm.

45 mm.

Before proceeding with fastening the hob to the top, fit the

seal (provided) along the perimeter of the hob as illustrated

in the figure.

Fastening hooks are foreseen, allowing you to secure the

hob to tops ranging from 40 to 60 mm in thickness. To

ensure the hob is securely fastened to the top, we

recommend you use all the hooks provided.

Hook fastening diagram

Hook position for Hook position for

tops H = 40 mm tops H = 60 mm

NB: Use the hooks contained in the "accessory pack"

The hob can only be installed above built-in ovens

provided with cooling ventilation.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 49 50

Kommentare zu diesen Handbüchern

Keine Kommentare

Whirlpool KTI 6412 IX Bedienungsanleitung Seite 9

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kochfelder Whirlpool KTI 6412 IX