Whirlpool Compactors Bedienungsanleitung PDF herunterladen (Seite 65)

Heating Element

Introduction

1. The heating element is used both during wash cycles and the heat dry cycles.

2. The purpose of the heater is to heat the water during the wash cycle and/or to heat the air

during the dry cycle.

Testing

CAUTION: ONLY TEST THE HEATING ELEMENT AT AMBIENT TEMPERATURE SO YOU DO NOT

BURN YOURSELF, AND ALSO TO OBTAIN THE CORRECT READING.

1. Disconnect dishwasher form electrical source.

2. Disconnect harness leads from the heating element.

3. Test central core or element:

a. Set the meter.

b. Zero the meter.

c. Touch the meter probes to the terminals of the heating element.

1) A good heating element will read between 16 and 20 ohms.

4. Test core to shell:

a. Set the meter on the Rx10K scale.

b. Zero the meter.

c. Touch on of the probes to one terminal and the other probe to the shell of the element.

1) There should be no continuity (infinite resistance.)

d. Touch one of the probes to the other terminal and the other probe to the shell of the

element.

1) There should be no continuity (infinite resistance.)

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 101 102

Keine Kommentare

Whirlpool Compactors Bedienungsanleitung Seite 65