Whirlpool ACM 795/BA Bedienungsanleitung PDF herunterladen (Seite 10)

EN 68

To change the power level, slide your nger horizontally on the slide touchscreen: the number inside the circle increases/decreases as your nger slides up/

down the touchscreen, ranging from a min. setting of 1 to a max. of 9. The slide touchscreen can be used to activate the booster function by pressing “BOOST”

(“P” on the display) The “BOOST“ power level can be used for 10 minutes maximum, after which the appliance automatically sets the power to level 9.

If more than one cooking zone is on, the slide touchscreen allows you to change the power level of the selected zone, indicated by the

presence of a luminous dot at the bottom right of the power level indicator. To select a zone, simply press the relative round key.

Deactivation of cooking zones

Select the cooking zone to be switched off by pressing the relative round key (a dot lights up at the bottom right of the power level indicator). Press OFF on

the slide touchscreen.

The cooking zone switches off and, if the zone is still hot, the letter “H“ appears in the circle.

“H“ is the residual heat indicator. The hob has such an indicator for each cooking zone; it signals which zones are still hot. When the

cooking zone cools down, the display goes off.

Timer selection

The timer can be used to set a max. cooking time of 90 minutes.

Select the cooking zone to be used with the timer (a dot lights up at the bottom right of the power level indicator), then set the required cooking time using the

+ and - keys of the timer function: the time is minutes is shown next to the cooking zone display.

A few seconds after the key is pressed, the timer begins the countdown (the luminous dot of the selected cooking zone starts ashing).

Once the set time has elapsed, an acoustic signal sounds and the cooking zone switches off automatically.

Control panel lock

This function locks the hob controls to prevent accidental switching on (e.g. during cleaning operations).

Press the button for three seconds: a beep sounds and an indicator lights up above the padlock symbol to signal activation. The control panel is locked

except for the deactivation function. To deactivate the control lock, repeat the activation procedure. The luminous dot goes off and the hob is active again.

IMPORTANT: The presence of water, liquid spilled from pots or any kind of objects resting on the button under the symbol can accidentally activate or deactivate

the control panel lock function.

Hold

This function allows you to temporarily hold and then resume cooking processes maintaining previous settings (except for timer setting). Press the key :

ashes on the display in place of the power levels. To resume cooking, press the key again.

Description of automatic functions

The hob features automatic functions for each cooking zone. The symbols of the available functions are shown next to the selection key of

each cooking zone. Every time an automatic function is selected, an indicator light turns on next to the symbol and the letter “A“ appears

in the cooking zone display.

Sixth sense Function

The SIXTH SENSE function automatically selects the ideal power level to bring water to the boil and signals boiling point.

After positioning the pot of water, switch on the hob and select the desired cooking zone. Press the key : “A“ appears on the display and the indicator light

turns on. During heating, an animation is displayed in the space next to the cooking zone.

To ensure correct operation of the SIXTH SENSE function, we recommend

that you:

• use water only (at room temperature);

• do not add salt, other ingredients or condiments until the water reaches

boiling point;

• do not change the power setting of the cooking zone or remove or move

the pot;

• do not use pressure cookers;

• ll the pot to at least 1/3 full (min. 1 litre) and never to the brim (see table

on the right).

For optimum results, observe the following advice: