Whirlpool TVL 641 Bedienungsanleitung PDF herunterladen (Seite 19)

Control panel lock

It is possible to lock the oven controls in order to

avoid accidental changes being made to the

settings (these may be made by children, during

cleaning, etc.). If the

button is pressed for 3

seconds the controls are locked and the CONTROLS

LOCKED indicator light illuminates. To use any of

the controls (e.g. to stop cooking), you must switch

off this function. Press the

button for 3 seconds

and the lock function will be removed.

When the controls are locked it is still possible to

switch off the hob. In this case the CONTROLS

LOCKED indicator light remains illuminated until the

function is deactivated.

Demo mode

The hob is able to operate in DEMO mode: all

heating elements are deactivated, and controls

remain operative.

To activate the DEMO mode:

1. Switch on the hob

;

2. Press the

and buttons simultaneously

and hold for 6 seconds. A buzzer sounds and the

display shows the text dE ON.

3. The hob is now operating in Demo mode.

To deactivate the DEMO mode:

1. Switch on the hob

;

2. Press the

and buttons in sequence, then

press the button and hold for 2 seconds. A

buzzer sounds and the display shows the text dE

OF.

3. The hob will now operate normally.

Switching off the hob

Press the button to switch the appliance off.

If the control panel lock has been activated, the

controls will continue to be locked even after the hob

is switched on again. In order to switch the hob on

again, you must first remove the lock function.

Practical advice on using the appliance

To obtain the best results from your hob:

 Use pans with a thick, flat base to fully utilise the

cooking zone.

 Always use pans with a diameter that is large

enough to cover the hotplate fully, in order to use

all the available heat.

 Make sure that the base of the cookware is

always dry and clean, to fully utilise and extend

the life of both the cooking zones and cookware.

 Avoid using the same cookware that has been

used on gas burners: the heat concentration on

gas burners may distort the base of the pan,

causing it not to adhere correctly.

Safety devices

Pan sensor

Each cooking zone is equipped with a pan sensor

device. The hotplate only emits heat when a pan

with suitable measurements for the cooking zone is

placed on it. If the indicator light is flashing, it may

indicate:

 An incompatible pan

 A pan whose diameter is too small

 The pan has been removed from the hotplate.

Residual heat indicators

After the pan has been removed from one of the

cooking zones, part of the power level indicator will

flash while the temperature of that particular zone

remains above 60°C. This reduces the risk of burns

and scalds.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 55 56

Kommentare zu diesen Handbüchern

Keine Kommentare

Whirlpool TVL 641 Bedienungsanleitung Seite 19

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kochfelder Whirlpool TVL 641