Induction hobs may whistle or creak during normal operation.
These noises actually come from the cookware and are linked to the
characteristics of the pan bottoms (for example, when the bottoms are
made from dierent layers of material or are irregular).
These noises may vary according to the type of cookware used and to
the amount of food it contains and are not the symptom of something
wrong.
TROUBLESHOOTING
• Check that the electricity supply has not been shut o.
• If you are unable to turn the hob o after using it, disconnect it from
the power supply.
• Induction hobs may produce hissing or crackling noises during
normal operation. These noises may vary depending on the pot
and pan used and the amount of food that these contain, and do
not indicate any type of defect.
Please note: The presence of water, liquid spilled from pots or any objects
resting on any of the hob buttons can accidentally activate or deactivate
the control panel lock function.
Error code Description Possible causes Solution
The control panel switches o because
of excessively high temperatures.
The internal temperature of
electronic parts is too high.
Wait for the hob to cool down before
using it again.
The connection voltage is wrong.
The sensor detects a discrepancy
between the appliance voltage and
that of the mains supply.
Disconnect the hob from the mains
and check the electrical connection.
Disconnect the hob from the power supply. Wait a few seconds then reconnect the hob to the power supply.
If the problem persists, call the service centre and specify the error code that appears on the display.
C81, C82
F02, F04
F01, F06, F12, F13, F25,
F34, F35, F36, F37, F41,
F47, F58, F61, F76
SOUNDS PRODUCED DURING OPERATION
MAINTENANCE AND CLEANING
WARNING
• Do not use steam cleaning equipment.
• Before cleaning, make sure the cooking zones are switched o and that the residual heat indicator (“H”) is not
displayed.
Important:
• Do not use abrasive sponges or scouring pads as they may damage
the glass.
• After each use, clean the hob (when it is cool) to remove any
deposits and stains from food residue.
• Sugar or foods with a high sugar content can damage the hob and
must be immediately removed.
• Salt, sugar and sand could scratch the glass surface.
• Use a soft cloth, absorbent kitchen paper or a special hob cleaner
(follow the Manufacturer’s instructions).
• Spills of liquid in the cooking zones can cause the pots to move or
vibrate.
• After cleaning the hob, dry thoroughly.
If the iXelium ™ logo appears on the glass, the hob has been treated
with iXelium ™ technology, an exclusive Whirlpool finish which ensures
perfect cleaning results, as well as keeping the surface of the hob shiny
for longer.
To clean iXelium ™ hobs, follow these recommendations:
• Use a soft cloth (microbre is best) dampened with water or with
everyday glass cleaning detergent.
• For best results, leave a wet cloth on the glass hob surface for a few
minutes.
(72 Seiten)
(32 Seiten)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern