Whirlpool MEC 3080 IAG Bedienungsanleitung PDF herunterladen (Seite 7)

INSTALLATION

Assembly

The hob can be installed into a frame between 20 mm and 40

mm deep and can be placed against a wall higher than the

worktop, leaving a minimum distance of 100 mm.

Very important reminders for cooling the electronic

module.

To avoid overheating the electronic module, which could

decrease the effectiveness of the hob, it is advisable to assemble

the new induction hob following the instructions below.

If there is a drawer under the hob distance “

” must be at least

5 mm.

If an oven is to be installed (which must be of our manufacture

and have a cooling system), distance “

” must be 20 mm.

If the oven is positioned below the induction hob, do not use the

hob while the oven pyrolysis cleaning is running.

DECLARATION OF CONFORMITY

•

This cooktop is suitable for contact with foodstuffs and

complies with EEC (CE) Regulation n. 1935/2004.

•

This appliance has been designed to be used only for cooking.

Any other use (e.g. for room heating) is to be considered

improper and consequently dangerous.

•

The appliance has been designed, constructed and sold in

compliance with:

- safety objectives of the “Low Voltage” Directive 2006/95/CE

(which replaces 73/23/CEE and subsequent amendments);

- protection requirements of “EMC” Directive 89/336/EEC;

- requirements of Directive 93/68/EEC.

CABINET

OVEN

1 2 3 4 5 6 7 8

Keine Kommentare

Whirlpool MEC 3080 IAG Bedienungsanleitung Seite 7