Whirlpool CLHB 30 NE Bedienungsanleitung PDF herunterladen (Seite 7)

GB5

After unpacking the product, check for any damage during transport. In case of problems, contact the dealer or the After-

Sales Service.

PREPARING THE CABINET FOR FITTING

• The distance between the underside of the appliance and the separator panel must respect the dimensions given in

the figure.

• In order to ensure the correct operation of the product, do not obstruct the minimum required clearance between

the hob and the top of the unit (min. 5 mm).

• If an oven is installed beneath the hob, make sure the oven is equipped with a cooling system.

• Do not install the hob above a dishwasher or washing-machine, so that the electronic circuits do not come into

contact with steam or moisture which could damage them.

• In the case of flush-mounted installation, call the After-Sales Service to request assembly of screws kit 4801 211

00112.

• To remove the hob from the worktop use a screw driver (not supplied) unlocking the springs from the bottom side

of the appliance.

RECOMMENDED POT BOTTOM WIDTHS

INSTALLATION

WARNING

- Install a separator panel

under the hob.

- The lower part of the

product must not be

accessible after installation.

- In case of installation of an

undertop oven, do not

interpose the separator

panel.

28 cm

17 cm 28 cm

21 cm

15 cm 21 cm

18 cm

14.5 cm

12 cm 18 cm

10 cm 14.5 cm

min 5 mm

min 20 mm

min 5 mm

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Keine Kommentare

Whirlpool CLHB 30 NE Bedienungsanleitung Seite 7