Whirlpool ACM795BA Bedienungsanleitung PDF herunterladen (Seite 11)

EN 21

When the water comes to the boil, the hob emits an acoustic signal. This signal is sounded three times at regular intervals. After the second signal, a minute

minder is automatically activated to keep track of boiling time. After the third signal, the hob automatically selects a lower power setting to keep the water

simmering. From this moment on, you can add any ingredients you like, set the timer and change the power setting. Changing the power setting or selecting

the “hold” function overrides the SIXTH SENSE function.

The function is deactivated when the “hold“ function is selected.

• The hob manages the SIXTH SENSE function and booster levels autonomously, therefore, in some cases, it may not be possible to activate

the booster with the SIXTH SENSE function already in use.

• The quality of the cookware may affect the performance of the SIXTH SENSE function.

Simmering Function

After bringing the food to the boil, select the simmering function: a power level designed to maintain a gentle simmer is automatically set.To deactivate the

function simply press OFF on the slide touchscreen.

Melting function

The melting function maintains a low and even temperature in the cooking zone. After positioning the pot/accessory on the chosen cooking zone, switch on

the hob and select the cooking zone. Press the key : “A“ appears on the display and the indicator light turns on. To deactivate the function, simply press

OFF on the slide touchscreen.

Flexi cook

This function allows you to use the cooking area as two separate cooking zones or as an extra-large single zone.

It is perfect for oval, rectangular and elongated pans (with maximum base dimensions of 38x18 cm) or more than one standard pan. In order to activate the

exicook function, switch on the hob and press the button

: the two cooking zone displays show level “5”; both dots next to the level number are lit, indicating

that the Flexi cook is activated.

To change the power level, move your nger along the slide touchscreen: the number inside the circle will change with just a quick slide of the nger from a

minimum of 1 to a maximum of 9. To deactivate the exible zone function, press the key

: the cooking zones revert to operating singly again. To switch

the cooking zone off, press OFF

The message “no pot” will appear on the display of the zone that is not able to detect any pot (because of missing pot, or misplaced or not

suitable for induction hob). This message remains active for 60 seconds: in this time you can add or slide pots within the exicook area as you prefer.

After 60 seconds if no pan is placed on the zone, the system stops “searching” pots on that zone, the symbol remains visible on the display to remind that

the zone is disabled.

To reactivate the Flexicook function on both heaters, press the button

The Flexi cook function is also able to detect when a pot is moved from one zone to the other one within the exi cook area keeping the same power level of

the zone where the pan originally was placed (see the example in the gure below: if the pot is moved from the front heater to the rear heater, the power level

will be shown on the display corresponding to the zone where the pot is placed).

It is also possible to operate the Flexi cook area as two independent cooking zones, using the corresponding button of the single zone. Place the pot in the

center of the single zone and adjust the power level with the slide touchscreen.

Important: make sure to place the pans centered on the cooking zone in the way to cover the logo placed in the center of the single

cooking zone.

In case of big pot, oval, rectangular and elongated pans make sure to place the pans centered on the cooking zone covering both logos.