Whirlpool AWM 8000/1 Bedienungsanleitung PDF herunterladen (Seite 8)

DRAINING RESIDUAL WATER

Draining Residual Water

Residual water should be removed:

•

before moving a washing machine (relocation),

•

when installing in areas prone to frost and

•

before removing the filter.

Before emptying the residual water, switch the appliance off

and unplug it from the mains socket Make sure that the water

has cooled before draining

Turn the slot through 180°, so that the dot points to the open

lock. To do this, use the insert from the detergent dispenser

or a coin. The cover bends down to the floor.

Remove the hose, place a low container underneath and pull

the cap from the hose.

Drain the residual water until no more flows out. Then close

the residual water emptying hose.

Put the hose in the cover, fold the cover up and close the cover

using the detergent dispenser insert or a coin. The dot points

to the closed lock.

Pour about 1 l of water into the detergent dispenser to

reactivate the ecosystem. You must also plug the mains plug

back into the socket-outlet.

Now you can fill the washing machine and run the desired

programme.

2/5

3gb15103.fm Page 11 Friday, August 27, 2004 6:52 PM

Black process 45.0° 150.0 LPI

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 16 17

Keine Kommentare

Whirlpool AWM 8000/1 Bedienungsanleitung Seite 8