Whirlpool AWM 235/3 Bedienungsanleitung

19QUICK REFERENCE GUIDE GBBEFORE USING THE APPLIANCE FOR THE FIRST TIME• IMPORTANT: MAKE SURE YOU HAVE READ THE INSTALLATION INSTRUCTIONS. • REMOVE TH

28• PackingThe packaging is marked with the recycling symbol , signifying that it can be 100% recycled.• ApplianceThe appliance is made of recyclable

291. Sort the load according to:• Fabric type / care label symbolCotton, mixed fibres, synthetics, wool.• ColoursSeparate coloured and white articles.

30CHOOSING THE RIGHT DETERGENTThe type of detergent depends on•the type of fabric (cottons, synthetics, delicates, wool)Note: Use only specific deterg

31FILLING THE DETERGENT AND ADDITIVES1.Pull out the detergent drawer. The drawer will have three or four chambers depending on the model.2.Filling the

32SELECTING THE PROGRAMME(Depending on model, see also the separate programme chart).For appliances WITH temperature selector knob1.Turn the programme

33PROGRAMME SEQUENCE INDICATOREach colour indicates a washing cycle by fabric type corresponding to the detergent drawer information.SYMBOLSMain washl

34WHEN TO REMOVE THE FILTER / DRAIN RESIDUAL WATERCaution: Some models do not have a filter for foreign bodies, as they are fitted with a special self

35APPLIANCE EXTERIOR AND CONTROL PANEL•Clean using normal household detergent (do not use abrasive products).•Dry with a soft cloth.DETERGENT DRAWERDi

36The appliance will not switch on•Power plug properly inserted in mains socket?•Mains fuse OK?•Power failure?•Tap turned on? Is water coming through?

20GB CONTENTSINSTALLATION INSTRUCTIONSPAGE21APPLIANCE AND ACCESSORIESPAGE27PROTECTING THE ENVIRONMENTPAGE28SAFETY INSTRUCTIONSPAGE28MOVING AND TRANSPO

21TRANSIT BOLTSThe appliance is fitted with transit bolts to prevent internal damage while it is being moved.Before using the appliance the transit bo

22INSTALLATION•Install the appliance on a solid and level floor surface, preferably in a corner of the room.•Make sure that all four feet are resting

23WATER SUPPLY•Water supply: only cold water.•Tap: 3/4” threaded hose connector.•Water pressure (mains pressure): 10-100 N/cm2 (100 kPa-1000 kPa).For

24DRAINING (varies according to model)a) Drain hose on rear panel of appliance, Figure 11.Unhook the drain hose from the left clip, see arrow A in Fig

251) ELECTRICAL CONNECTIONS“Warning - this appliance must be earthed”This appliance is normally supplied with a mains lead having a plug fitted in the

26INSTALLATION INSTRUCTIONSMOBILITY WHEELS(for UK only)Depending on model, your washing machine is provided with mobility wheels.You will find these w

271.Worktop2.Control panel3.Detergent drawer4.After-Sales Service sticker (inside door)5.Door6.Door handle-To open: pull handle-To lock: press the doo