Whirlpool KHRT 7710/I Bedienungsanleitung PDF herunterladen (Seite 5)

Installation

A) If the work top is made of wood, use the appropriate brackets,

spring clips and screws provided.

• Position the 4 clips (A) around the cooktop frame, in the slots

provided. See Fig. 1.

• Measure the centre of the vertical sides of the cut-out as shown in

Fig. 2.

• Position the centre of the brackets (C) on the centre of the side

previously identified.

• The upper edge of the brackets must be flush with the work top

surface.

• Secure using the 4 screws (B) provided that should screw into the

pre-prepared holes.Insert the hob in the pre-prepared hole so

that the clips (A) lodge into the bracket holes provided (C Fig. 4

and 5).

B) If the work top is made of marble or other materials

(plastic, ceramic tile, stone etc.), the cooktop must be fitted

with code no. 4801 211 03229 brackets (to be ordered from the

Customer Care Department).

Installation

Fig. 1

Fig. 2

Fig. 3

Fig. 4

Fig. 5

1 2 3 4 5 6 7 8 9 10 11 12

Keine Kommentare

Whirlpool KHRT 7710/I Bedienungsanleitung Seite 5