
GB7
Before using the glass ceramic hob
To make the most of your new appliance, please read the user instructions carefully and keep them handy for future
consultation.
First use
Upon first installation, the control panel performs a functional test for about 1 second, after which it automatically switches
to the Key lock function.
To deactivate the function, press and hold button D ; an acoustic signal will sound and the corresponding led will
turn off.
N.B.: if a reset occurs, repeat the procedure described above.
Operating the hob
To switch the hob on, keep button A pressed for approx. 2 seconds. The 4 cooking zone displays show 0.
If within 20 seconds none of the cooking zones is activated, the hob switches off automatically as a safety precaution.
Press one of the buttons B corresponding to the cooking zone you intend to use.
Select the heat setting required with buttons E or C. The other selectable cooking settings go from 1 to 9.
Press buttons +/- at the same time to cancel all settings.
Pressing button + when level 9 is reached, the Booster function is activated and the letter A appears on the display.
Important: the control is deactivated 10 seconds after the heat setting has been selected. To change the heat setting, first
press the selection button B again, then proceed to change the setting, using buttons E or C.
Multizone
After selecting the desired zone and setting the level (as described in the previous section) press F : an indicator above
the button turns on, activating the additional zone. The multiple zone can only be used if:
1. the cooking zone is provided with multiple zone;
2. the power level selected is greater than 0.
To deactivate the multiple zone, press button B of the desired zone, then press F again.
To set the Timer function, select the desired cooking zone and power setting then press the cooking zone key again and a
luminous dot will appear on the display of the timer-controlled cooking zone.
CONTROL PANEL
A. On/Off
B. Cooking zone and timer selection
C. Heat setting increase
D. Key lock
E. Heat setting decrease
F. Multiple zone Activation/Deactivation
INSTRUCTIONS FOR USE
E
C
A
B
D
F
Kommentare zu diesen Handbüchern