Whirlpool CKH 472 Bedienungsanleitung Seite 4

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 7
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 3
N C
M Y
INSTALLATION
FASTENING THE HOB TO THE UNIT
Use the brackets (C) supplied with the hob.
Position the brackets in correspondence with the holes
of the ho b and fasten t hem t o t he unit with the screws
supplied as shown (fig. 2).
ELECTRICAL CONNECTION
IMPORTANT: The installation must be performed
according to the manufacturer’s instructions.
Incorrect installation may lead to damage to
people, animals or things for which the
manufacturer cannot be considered responsible.
The connectio n to the el ectri cal mains must be
performed by qualified engineers and according to
the regulations in force.
The device must be co nnected to t he elect rical
mains checking first of all that the voltage
corresponds to the value indicated in the rating
plate.
Ifthereisaplugitmustbeconnectedtoasocket
connected to the earth system in conformity with
the safety regulations.
The connection can be made directly to the mains
putting an omnip olar switch with minimum op ening
between the contacts of 3 mm between the device
and the electrical mains.
The supply cable must not t ouch hot parts and must
be so po sitioned that t he te mperatur e o f 75
o
Cis
not exceeded at any point.
When the de vice is installed, the switch or the
socket must always be accessible.
The device must have its own power supply. Any
devicesinstalledneartoitmusthaveaseparate
power supply.
N.B.: Do not use adapters, reductions or distribution
blocks for the conne ction t o the mains because these
could cause ov erheating or b urns.
If the installation requires modifications of the home
electrical system or if there is incompatibility between
the socket and the device plug, professionally trained
engineers must perform the work. In particular they
must check that t he section of the socket cables is
suitable for the power absorbed by the device.
The device must be connected to the earth
system.
The manufacturer declines any responsibility
for any problem caused by failure to observe
this rule.
fig. 2
27
27
Seitenansicht 3
1 2 3 4 5 6 7

Kommentare zu diesen Handbüchern

Keine Kommentare