Whirlpool WFW96HEAC Bedienungsanleitung PDF herunterladen (Seite 13)

12. Touch and hold START to begin

wash cycle

Touch and hold START to start the wash cycle. To pause a

cycle in progress, touch START once, then touch and hold

again to continue the cycle. To cancel a cycle, touch POWER.

Once you touch and hold START, you will hear the door lock,

unlock, and lock again. The washer door will remain locked

during the wash cycle.

Unlocking the door to add garments:

If you need to open the door to add 1 or 2

missed garments, you may do so while the

“Add Garment” light is lit.

Touch START once; the door will unlock

once the washer movement has stopped.

This may take several minutes. Then close

door and touch and hold START again to

restart the cycle.

13. Remove garments promptly

after cycle is nished

Promptly remove garments after cycle

has completed to avoid odor and rusting of

metal objects on garments. When unloading

garments, pull back the door seal and check

for small items between the tub and the washer

drum.

If you will be unable to remove the load

promptly, use the Fan Dry option. If the

Fan Dry option is selected, the washer will

automatically activate the fan and tumble

the load periodically for up to 12 hours. To turn

off the Fan Dry option, touch POWER. To set

the washer so that the Fan Dry option does not

come on for future cycles, touch Fan Dry.

NOTE:

The door will remain locked while the Fan Dry option is active.

To cancel the option and unlock the door, touch POWER.

A small amount of water may remain in the dispensers after

the wash cycle is complete. This is normal.

This washer has a tight seal to avoid water leaks. To avoid

odors, leave the door open to allow the washer to dry

between uses.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 51 52

Keine Kommentare

Whirlpool WFW96HEAC Bedienungsanleitung Seite 13