Whirlpool HMMR 80220 Gebrauchs- und Pflegeanleitung

Health & Safety, Use & Care and Installation guide

10PRODUCT DESCRIPTIONAPPLIANCECONTROL PANEL1. Worktop2. Control panel3. Water tank4. Door5. Door handle6. Door lter (behind door) 7. Bottom lter (

11ENDOORDRUM LIGHT (if available)AVAILABLE ACCESSORIES To open the door, pull the handle.If you interrupt a running programme by opening the door, th

12FIRST TIME USEHOW TO USE THE APPLIANCE1. CHECK WATER TANKMake sure that the water tank is correctly inserted2 . CHECK DRAIN HOSEMake sure that the

13ENDAILY USE WARNINGMake sure that no lighters or matches are left in clothing. Make sure that the laundry is not soaked with ammable liquids.1. LO

14Set dryness level, if needed If you want to change the dryness level, make sure that the Dryness level button « lights up. Turn the knob to sele

15ENend, the dryer will tumble the laundry for about 10 minutes, to prevent creasing. The display shows an animation.9. EMPTY WATER TANK / CLEAN DOOR

16PROGRAMME Type of Wash and RecommendationsCare LabelsRegulationsSYNTHETICSFor drying laundry made of synthetic bres.max. load (kg): 3.5default p

17ENPROGRAMME Type of Wash and RecommendationsCare LabelsRegulationsDRYING TIMETime-restricted drying programme. Select programme duration by option

18STEAM OPTIONFRESH CAREGENTLEDRYING TIME OPTIONDRYNESS LEVELMinimises creasing of garments made of cotton, synthetics and their blends by adding a hu

19ENFUNCTIONSON/OFFKNOBSTART/PAUSEKEY LOCKSTART DELAYTo switch the dryer on: press the button until the Start/Pause button lights up. To switch the dr

2ENGLISH ...3

20programme start, the delay on the display is replaced by the remaining programme duration.When selecting a delay, the original programme duration ap

21ENINDICATORSWATER TANK FULL => empty water tankBOTTOM FILTER CLOGGED=> clean bottom lterDOOR FILTER CLOGGED=> clean door lterFAILUREF..Fo

22ENERGY SAVING TIPS• To reduce the drying time, make sure that the laundry is spun with the maximum possible spin speed of the wash programme. This

23ENCLEANING & MAINTENANCEEMPTYING THE WATER TANKEmpty the water tank after each programme, provided the drain hose is not connected to your sewa

24Clean the door lter after each programme.Make sure that the laundry is unloaded. Open the door.1. Remove the door lter by pulling it upwards. 2. P

25ENCLEANING THE BOTTOM FILTER5. Wipe the bottom lter dry, so that it is not dripping wet anymore.6. Clean the lter compartment with a soft cloth or

26CLEANING THE OUTSIDE OF THE DRYERUse a soft damp cloth to clean the outer parts of the dryer.Do not use glass or general purpose cleaners, scouring

27ENREVERSING THE DOOR STOPIf needed, the door stop of the dryer door can be reversed. Use pliers and a cross-head screwdriver for the procedure. For

285. Unscrew the bottom screw, to release the cover frame on the front of the door.6. Turn the door and lay it down on the door glass. 127. Carefully

29EN9. Remove the two side screws. Do this on both sides of the door.10. Remove the 4 inner screws on each side of the door.11. Remove the side parts

3ENENGLISHHEALTH & SAFETY, USE & CARE and INSTALLATION GUIDESHealth and Safety guideSAFETY INSTRUCTIONS ...

3013. Fix the 2 side screws on both sides of the door again.14. Fix the 4 inner screws on each side again.15. Turn the door and lay it down on the doo

31EN17. Turn the door again and lay it upside down. Fix the bottom screw again.18. Insert the door lock on the right side of the door opening. Press i

32Your dryer is equipped with various automatic safety functions. These enable failures to be detected in good time and the safety system can react ap

33ENProblem Possible Cause SolutionWATER DROPLETS ARE BENEATH THE DRYERBottom lter not inserted correctly• Check position of the bottom lter and ma

34FAILURE INDICATOR AND MESSAGESMake sure to • Empty the water tank after each programme• Clean the door lter after each programme• Clean the bott

35ENBelow is a summary of possible failure causes and solutions.If the problem persists after having followed the instructions as indicated below, pre

36TRANSPORT AND HANDLING1. Unplug the dryer.2. Make sure that door and water tank are properly closed.3. If the drain hose is connected to your sewage

37ENAFTER-SALES SERVICEBEFORE CALLING THE AFTER-SALES SERVICEIF AFTER THE ABOVE CHECKS THE FAILURE STILL OCCURS, GET IN TOUCH WITH THE NEAREST AFTER

382a. 2b.1.

39EN3a.3b.max 2 cmmax 0.79 inch

4CLEANING THE BOTTOM FILTER ...25CLEANING THE OUTSIDE OF THE DRYER ...

404.max 100 cm39 inch12

41EN5... xxx V ~ xx Hz xx A IPX4 EV Dxxxx xxxx xxxx6a.6b.

400010879204001

5ENSAFETY INSTRUCTIONSHealth and Safety guideIMPORTANT TO BE READ AND OBSERVEDBefore using the dryer carefully read, Health and Safety and Use and Ca

6leading to a damaging of the laundry.If you want to stack the dryer on a washing machine, rst contact our After-Sales Service to verify if this is p

7ENCorrect replacement are identied by the colour insert or the colour embossed in words on the base of the plug.Replacement fuse covers are availabl

8SCRAPPING OF HOUSEHOLD APPLIANCESWhen scrapping the dryer, make it unusable by cutting o the power cable and removing the doors and shelves (if pres

9ENDECLARATION OF CONFORMITYThis appliance has been designed, constructed and distributed in compliance with the requirements of European Directives: