Whirlpool Compactors Gebrauchs- und Pflegeanleitung PDF herunterladen (Seite 7)

Installation

1. Remove the mounting screws attaching the foot pedal to the

compactor. Remove foot pedal.

2. Remove mounting screws attaching the toe guard to the

compactor. Remove toe guard.

3. Remove the mounting screws attaching the decorative panel

to the compactor. Remove decorative panel and discard

mounting screws.

4. Align the bottom of the custom panel with the bottom of the

drawer front.

5. Secure the panel from the back using four #8 x 1" wood

screws as shown.

6. Attach a 15" (38,1 cm) x ¹⁄₂" (13 mm) quarter-round filler along

the top of the drawer front using glue or screws.

7. Reinstall the toe guard using the existing screws and ¹⁄₂"

(13 mm) washer. Then, reinstall the foot pedal.

COMPACTOR USE

How Your Compactor Works

The compacting ram is the part of the compactor which

compresses the trash. The compacting ram does not go to the

bottom of the drawer. You will not see compacting of trash the

first few times you load the compactor.

NOTE: The compactor drawer should be more than ¹⁄₂ full before

the compactor can begin to compress the load.

You may hear a noise when glass breaks. Strong glass bottles

may not break at all. The trash in a full compactor bag will be

about ¹⁄₄ the size of its original bulk.

Load bulky trash, bottles, and cans in the center of the drawer.

Bottles or cans not placed in the center may become caught

between the ram and the drawer. The Drawer Monitor Switch

then senses a “misload” and causes the ram to return to the “up”

position without compacting.

IMPORTANT: Do not push items down into compactor with

hands or feet.

NOTE: You will not see compacting of trash the first few times

you load the compactor. The compactor drawer should be about

¹⁄₂ full before the compactor can begin to compress the load.

1. Open the drawer. Lift and pull the handle or press the foot

pedal to open the drawer.

NOTE: Pressing the foot pedal opens the container only 3" to

6" (7.6 cm to 15.2 cm), depending on the load.

A. Mounting screws

B. Foot pedal

A. Custom panel

B. 15" x

¹⁄₂

" (38.1 cm x

13 mm) quarter-round

C. Panel screw

locations

D. Toe guard

E. Washer

F. To e guar d

screw

1 2 3 4 5 6 7 8 9 10 11 12

Kommentare zu diesen Handbüchern

Keine Kommentare

Whirlpool Compactors Gebrauchs- und Pflegeanleitung Seite 7

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Müllpresse Whirlpool Compactors