Whirlpool AKZM 8400 IX Bedienungsanleitung PDF herunterladen

EN1

These instructions shall also be available on website: www.whirlpool.eu

YOUR SAFETY AND THAT OF OTHERS IS VERY IMPORTANT

This manual and the appliance itself provide important safety warnings, to be read and observed at all times.

All safety warnings give specific details of the potential risk present and

indicate how to reduce risk of injury, damage and electric shock

resulting from improper use of the appliance. Carefully observe the

following instructions:

- Keep these instructions close at hand for future reference.

- Use protective gloves to perform all unpacking and installation

operations.

- The appliance must be handled and installed by two or more persons.

- The appliance must be disconnected from the power supply before

carrying out any installation work.

- Installation and maintenance must be carried out by a qualified

technician, in compliance with the manufacturer’s instructions and

local safety regulations. Do not repair or replace any part of the

appliance unless specifically stated in the user manual.

- Power cable replacement must be carried out by a qualified

electrician. Contact an authorized service centre.

- Regulations require that the appliance is earthed.

- The power cable must be long enough for connecting the

appliance, once fitted in its housing, to the main power supply.

- For installation to comply with current safety regulations, an omnipolar

switch with minimum contact gap of 3 mm must be utilized.

- Do not use extension leads, multiple socket adapters.

- Do not connect the appliance to a socket which can be operated by

remote control or timer.

- Do not pull the power supply cable.

- The electrical components must not be accessible to the user after

installation.

IMPORTANT SAFETY INSTRUCTIONS

This is the danger symbol, pertaining to safety, which alerts users to potential risks to themselves and others.

All safety warnings are preceded by the danger symbol and the following terms:

DANGER

Indicates a hazardous situation which, if not avoided, will cause serious injury.

WARNING

Indicates a hazardous situation which, if not avoided, could cause serious injury.

1 2 3 4 5 6 ... 13 14

Inhaltsverzeichnis

Seite 1 - IMPORTANT SAFETY INSTRUCTIONS

EN1These instructions shall also be available on website: www.whirlpool.euYOUR SAFETY AND THAT OF OTHERS IS VERY IMPORTANTThis manual and the applianc

Seite 2

EN10FUNCTION DESCRIPTION TABLEFUNCTION SELECTOR KNOBOFF To stop cooking and switch off the oven.LAMP To switch the oven light on/off.CONVENTIONALTo co

Seite 3

EN11COOKING TABLESRecipe Function Pre-heatingShelf (frombottom)Temp.(°C)Time(min)Accessories and notesLeavened cakesYes 3 150-175 35-90 Cake tin on wi

Seite 4 - SAFEGUARDING THE ENVIRONMENT

EN12Vols-au-vent / Puff pastry crackersYes 3 175-200 20-30 Drip tray / baking trayYes 1-4 175-200 25-45Shelf 4: oven tray on wire shelfShelf 1: drip t

Seite 5 - TROUBLESHOOTING GUIDE

EN13* Cooking time is approximate. Food can be removed from the oven at different times depending on personal preference.Lasagna & Meat Yes 1-4 20

Seite 6 - MAINTENANCE

EN14How to read the cooking tableThe table indicates the best function to use for any given food, to be cooked on one or more shelves at the same time

Seite 7 - REPLACING THE OVEN LAMP

EN2- If the surface of the induction plate is cracked, do not use it and switch off the appliance to avoid the possibility of electric shock (only for

Seite 8 - INSTRUCTIONS FOR OVEN USE

EN3- Do not heat or cook sealed jars or containers in the appliance.The pressure that builds up inside might cause the jar to explode, damaging the ap

Seite 9 - COOKING TIME SELECTOR

EN4After unpacking the oven, make sure that it has not been damaged during transport and that the oven door closes properly. In the event of problems,

Seite 10 - FUNCTION DESCRIPTION TABLE

EN5Energy saving tips- Only pre-heat the oven if specified in the cooking table or your recipe.- Use dark lacquered or enamelled baking moulds as they

Seite 11 - COOKING TABLES

EN6Oven interiorIMPORTANT: do not use abrasive sponges or metallic scrapers or scourers. Over time, these can ruin enamelled surfaces and the oven doo

Seite 12

EN7REPLACING THE OVEN LAMPTo replace the rear lamp (if present):1. Disconnect the oven from the power supply.2. Unscrew the lamp cover (Fig. 6), repla

Seite 13

EN8FOR ELECTRICAL CONNECTION, SEE THE PARAGRAPH ON INSTALLATION1. Control panel2. Upper heating element/grill3. Cooling fan (not visible)4. Dataplate

Seite 14 - RECOMMENDED USE AND TIPS

EN9INSERTING WIRE SHELVES AND OTHER ACCESSORIES IN THE OVEN 1. Insert the wire shelf horizontally, with the raised part “A” upwards (Fig. 1).2. Other