Whirlpool WU5750 Bedienungsanleitung PDF herunterladen (Seite 12)

USING YOUR DISHWASHER

To check dispenser

Remove dispenser cap. If dispenser is

empty, an “E” will be clearly visible inside

the dispenser.

“E”shows

when empty

The center of the Fill Indicator cap will be

clear when dispenser needs refilling.

Center will be

clear when

empty

To fill dispenser

You do not have to wait until the dispenser

is empty to refill it, but do not overfill h. The

dispenser will hold 6 ounces (175 mL) of

rinse agent. Under normal conditions, this

will last about 3 months.

1. Make sure the dishwasher door is fully

open.

2. Remove the Fill Indicator cap.

3. Add rinse agent to the dispenser. Do not

fill past the smallest opening in the lower

part of the dispenser.

If you overfill, excess rinse agent can

come out. This will not harm the dish

washer, but could cause over-sudsing.

4. Clean up any spilled rinse agent with a

damp cloth.

5. Replace the Fill Indicator cap and keep it

tightly closed.

NOTE: Your dishwasher is designed to use

a liquid rinse agent. You do not need to use

a solid or bar-type rinse agent.

Keep rinse agent

dispenser filled for

best drying results

Do not fill past

smallest opening

Quiet operating tips

To avoid thumping artd clattering noises

during operation:

• Make sure lightweight load items are

secured in the racks.

• Make sure pot lids and handles, pizza

pans, cookie sheets, etc. do not touch

interior walls or interfere with the spray

arm's rotation or cover the spray tower.

• Load dishes so they do not touch one

another.

NOTE: Keep sink drain plugs inserted during

dishwasher operation to prevent noise

transfer through drains.

12

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 23 24

Kommentare zu diesen Handbüchern

Keine Kommentare